|
We supply API certified oilfield drilling rigs, workover rigs, drawworks, wire rope, drill line, DC motor, AC motor, YM Hydranlic Catheads, ZP series rotary table, hydraulic winches, air winches, hydraulic power units, rotary hoses, crown block, sheave, traveling block, hooks, deadline anchor, top drive spare parts, drill pipe elevator, casing elevator, drill collar elevator, tubing elevator, sucker rod elevator, slip type elevator, single joint elevator, SE spider, links, perfection link, manual tong, casing tong, dies, power slip, manual slip, Kelly bushing, iron roughneck, power tong, hydraulic power tong unit, Kelly spinner, ram BOP, annular BOP, diverter, BOP control system, BOP control line, Conflex hose, spacer spools, adapter spools, double studded adapter flanges, drilling spool, choke and kill manifold, gate valves , butterfly valves, shale shakers, screens, desander, Centrifugal pumps, Vacuum degassers, Mud cleaners, Desilters, Shearing pumps, Centrifuges, Agitators, Mixing pumps, Poorboy degasser/Mud gas separator, screw pump, Venturi hopper, Submersible slurry pump, Flare igniter, Mud gun, Mud tanks, F-Series Triplex Mud Pump, 3NB Series Triplex Mud Pump, Unitized Mud Pump Package, Mud pump Spare parts such as Discharge Filter Assembly, Clamp of Mud Pump, Piston Assembly, Cylinder Head and Valve Cover, Guide plate, Plug Board Assembly, Air chamber assembly, Shear Relief Valve, Liner of Mud Pump, Cross Head of Mud Pump and Other parts Liner hanger, Cement head, Float collar and float shoe, Cementing plug, Casing Packer, Casing Centralizer, Mill shoe, Stop collar, Double pump cementing units, fracturing pumping units, Completion tools, pumping units, sucker rods, sucker rod pumps, screw pumps, submersible motors, X-mas tree, tubings, drill pipes, drill collars, heavy weight drill pipes, Kelly, stabilizers, drilling jars, bit subs, X-over subs, hole openers, casing and tubing drifts, casing scrapers, drilling instrument and electrical System, oilfield camp houses, drilling instrumentation and electrical system. Please send email to us if you need any information. |
|
DC and AC motor |
DC motor
We successfully developed the nation's first DC and AC asynchrounous oil-drilling motors with variable frequency in 1998, which markedthe end of the history of dependenct on imported motors. The achievement filled the gap in domestic oil-drilling motors. The company take responsibility for working on the national industry standard of oil-drilling motors.
DC&AC oil-drilling motors ranging from 200kw to 1600kw have over 23 power series and 160 types, which can be equipped in the 1000m-12000m drilling-rigs of both the land and oceans. The company's oil products are widely distributed in 14 Petroleum Administrative Bureaus in China and are exported to USA, Russia, Kazakhstan, Iran, Saudi Arabia and Egypt, etc.
Description
|
YZ08 and YZ08A DC motors are applied to mud pump, rotary table, winch etc.(Qty: 660 from 2001-2015)
|
Parameter
|
Rated Power:800kW
|
Rated Voltage:750V
|
Rated Current:1150A
|
Rated Speed:970r/min
|
Rated Torque:8033N•m
|
Power Factor:92.70%
|
Insulation:H
|
Mass:3200kg
|
AC motor
General
WD23F9 motors apply for dragging and controlling of voltage supply type frequency converter and can be used for driving lift winch, mud pump and figure plate etc. of drilling machine, they can also be used as drag motor for other varying frequency speed regulating device.
Structure features
The structure of WD23F9 motors is horizontal, single standard extension shaft three phase cage asynchronous motor. Extension taper is 1:9.6 with oil slots for removing coupler by hydraulic force. The motor is forced-ventilation type with blower.
Grade Safety IP44 of Motor is force-ventilated motor, which blower motor has two poles and is blast motor (EX Ⅱ BT4), which should use in no acetylene environment.
Stator core is laminated with circular punching laminations of 0.5mm high quality cold-rolled silicon steel sheet. The motor frame is of steel sheet welded structure. There is axial ventilating duct between core back and motor frame. Stator coils are conductors taped with FCR fusing film.
Bus ring is wounded with copper busbar. After insulating wrap, four bus rings shall be fixed on the core press ring through supporting and clamping unit. Winding leads are connected with bus rings terminals by high-strength bolts, and the leads are marked respectively with U, V, W phases.
The frame heads are of easting structure. Rotor is of copper bar squirrel-cage structure where there are double-row axial ventilating ducts. Conductor bar, end ring, protective ring are all made of special high-strength copper alloy.
Basic data
Main Specifications
Main Specification
|
Type
|
WD23F9/F9X1/F10
|
Rated Power
|
kW
|
600
|
Rated Voltage
|
V
|
600
|
Rated Current
|
A
|
714
|
Rated Efficiency
|
%
|
95
|
Rated Frequency
|
Hz
|
33.5
|
Rated Speed
|
r/min
|
661
|
Rated Torque
|
N·m
|
8670
|
Max. Constant Power Speed
|
r/min
|
1240
|
Pole
|
|
6
|
Insulation Class
|
class
|
200
|
Ventilation
|
|
Forced-ventilation
|
Duty
|
|
continue
|
Degree of Protection of Enclosure
|
|
IP44
|
Type of Protection
|
|
ExIIT3
|
Temperature Rise Limits
|
Motor Parts
|
Measuring Method
|
Allowable Temperature Rise(K)
|
Stator Windings
|
Resistance
|
200
|
Bearing
|
Thermometer
|
55
|
Bolt Fasten Torque
|
Bolt Diameter
|
M6
|
M8
|
M10
|
M12
|
M16
|
Fasten Torque (N·m)
|
7±1
|
20±3
|
37±5
|
62±7
|
155±15
|
Bolt Diameter
|
M20
|
M22
|
M24
|
M33
|
|
Fasten Torque (N·m)
|
300±20
|
340±24
|
700±36
|
1300±65
|
|
|
|
Previous:
Next:
Back |
|
Visit: time:2017/4/14 【Print】 【close】 |
|
|
|
|